Beskrivning
Replaceable electrode suitable for pH Temp meter P50 Pro.
- Remove the electrode by turning the thread of the sealing ring on the lower part of the meter.
- Pull off the defective/old electrode carefully.
- Place the new electrode carefully with the gap properly aligned so that the contact points connect well and neither the meter nor the electrode is damaged.
- Check also that the rubber seal is well seated.
- Tighten the thread on the sealing ring again.
- Calibrate the multimeter
- The multimeter is now ready for use again.
-
Tillverkare:
- Produktvikt: 0,10 kg
Omdömen